Trespa Pura NFC
Our system simplifies the installation of Trespa Pura by eliminating the typical 1x wood furring strips, and EPDM strips, common with typical installation systems.
By eliminating these steps, the MFTP system from Monarch reduces on-site labor, and additional materials, but still creates a ⅞” drained and ventilated cavity behind the cladding. This cavity is required by Trespa, and protects the wall and cladding from trapped moisture.
Installing the cladding with the Monarch system provides a direct labor and material cost savings to the installer. It also avoids the ordering, handling, cutting, and fastening of 1x furring strips. These furring strips can also degrade and hold moisture against the building substrate.
Features
- Custom Cladding Support System for Trespa Pura NFC
- Eliminates 1x Furring
- 7/8” air space behind the panel
- Ventilated Starter Rail, Edge Trim Inside and Outside Corners
Trespa Pura Profiles
MFTP - Clip
Trespa System Clip
Our Trespa Pura clip allows you to install Trespa Pura panels without wood furring and secures the cladding in 16″ or 24” O.C intervals
MFTPSR - Starter Rail
Trespa System Starter Rail
Our Trespa Pura starter rail serves both as a starter rail and ventilated system closure. It can be used at the head of windows, doors, and other penetrations.
MFTPHR - Head Rail
Trespa System Head Rail
Our Trespa Pura head rail is used for closing off the top of systems and can also be used above windows and doors.
MFTPET - Edge Trim
Trespa System Edge Trim
Our Trespa Pura edge trim is a useful profile and can be used all around the building envelope. Uses include window and door trim, vertical transitions, and linear penetrations.
MFTPOC
Trespa System Outside Corner
Our Trespa Pura outside corner is designed to cover the cut ends of the planks turning a corner, which allows for some forgiveness in slightly uneven cuts.
MFTPIC
Trespa System Inside Corner
Our Trespa Pura inside corner is a great solution allowing for ventilation through the inside corner, which can be more susceptible to infiltration.
Product Specifications
Material | Aluminum |
---|---|
Projection | 7/8 Inch |